Simple Setup. Powerful Protection.

From box to protected in under 30 minutes. No coding required for the kit.

Step 1: Choose your path 🔧 or 📦

🔧 DIY — Follow the open-source documentation on GitHub, source the hardware yourself and configure it to your needs.

📦 Kit — Buy a ready-to-go kit. Pre-flashed, pre-paired and tested. Steps 2–8 cover the kit path.

Step 2: Select your kit

Model	Base box	Door sensors	Room sensors	Controllers	Support
BASE Basic	✅ Basic	❌	❌	❌	1 hour
Model 1	✅ Basic	2	1	2	1 hour
Model 2	✅ Basic	4	2	2	1 hour
BASE Advanced	✅ Advanced	❌	❌	❌	1.5 hours
Model 3	✅ Advanced	2	1	2	1.5 hours
Model 4	✅ Advanced	4	2	2	1.5 hours

Not sure which model?
Compact van, 1–2 entry points → Model 1
Large motorhome or multiple entries → Model 2 or 3
Full perimeter with night mode → Model 4

Extra sensors can be added at any time — the system is fully expandable.

Step 3: Order and configure

Order in the shop. We will send a short configuration email asking for your camper WiFi name and password — used only for the initial gateway setup, never stored on our servers. Change your password afterwards if you prefer.

Step 4: We build and ship

We flash and pair all devices to your specific setup, test the complete system, and ship within a week with full Track & Trace.

Step 5: Plug it in

Connect the gateway to your camper 12V system using the included cable — preferably a permanent fused circuit, not the starter battery. The gateway is pre-flashed. No updates needed. ⏱ 5–10 minutes.

Step 6: Mount your sensors

Remove the battery protectors and mount sensors with the included double-sided tape. All sensors are pre-paired — they connect automatically when they power up. ⏱ 2–4 minutes per sensor.

Step 7: Set up the app

📱 Download the free Shelly app (App Store or Google Play)
🔐 Log in with the credentials we send by email
🔄 Change email and password to your own — your account, your data
🔗 Verify all sensors show as connected and test by opening doors

⚠️ At least one phone must have the Shelly app installed to receive alarm notifications.

Step 8: Arm and leave

Activate Away Mode with one tap when you leave. Advanced models include Night Mode — monitors entry points while allowing movement inside. Trigger from the wall button or the included keyring.

Need help?

Kit buyers receive 1–1.5 hours of installation support included. Additional support is available at an hourly rate. DIY builders can join the GitHub community or purchase consulting if needed.

Money-back guarantee — if we cannot meet your requirements, we refund your full purchase. Simply return the kit to our address.